Hello dear Amigurumi knitting lovers.
Today we share a free amigurumi crochet pattern for you. As you know, every day we share new free amigurumi patterns. crochet masters, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn, amigurumi hippos, amigurumi monkeys , amigurumi cats, amigurumi dogs and more…

Today new daily crochet pattern Amigurumi Little Tiger Crochet Pattern, I want to give you some information about this pattern;

materials

2.5mm crochet hook
3mm crochet hook
Stitch marker Filler Scissors
Tube
of
hot glue (thick)
Amigurumi thread
Soft Amigurumi thread
Açucena thread (Liz’s hair)
Safety eyes (9mm)
Joint (9mm) or safety eye (7mm )
Clown nose 11mm
Glasses for amigurumi
Tapestry needle
Embroidery threads
Velcro /craft glue
Buttons /blush

C: row
AM: magic ring
ch: chain
sl st: slip stitch dc: single crochet pa:
double crochet hdc: half double crochet BLO: weave taking only the back loop (back loop only) FLO: weave taking only the front loop (front loop only) BPSC: weave taking the third loop: see photos below

ponto importante (bpsc – back post single crochet)

Every time it appears in the recipe to weave taking the third
loop, do as shown in the photos. It is neither the front loop used
in the FLO nor the back loop used in the FLO, it is a third loop
located behind the stitch.

arms (make 2)

Only put a little padding in the first part, hand and
forearm. Once the joint is made, do not add filler.
Amigurumi yarn in colors: (7563) and (1112)
Start with the yarn chosen for the skin.
C1: 6sc in magic ring (6)
C2: 6inc (12)
C3: (1sc, 1dec)* 4 (8)
C4 to 11: 8sc (8). Add the filling.
C12: 4dec (4)
C13: 4inc (8)
C14 to 19: 8sc (8)
Change to the sleeve color (yellow).
C20: 8scx (8). Don’t tighten the stitches too much.
C21: 8sc in BLO (8)
C22: 8sc (8)
The arms can be attached to the body in two ways, using
articulation (or safety eyes) or sewn. If you choose to
use the joint, leave the pieces open and attach to the body
when indicated. If you choose to sew it to the body, close it with
an inverted magic ring so that it is rounded, or join the
sides and sew it to the body.

articulated body and head

Amigurumi yarn colors: (1112), (7563) and (8176). Yellow, skin color
and off white.
Start with the color of the clothing (yellow).
Do 15 runs. From the second chain do:
C1: 1inc, 12sc, 4sc in the same stitch, 12sc, 1inc (along with the
first increase row). (32)
This first row will be worked on both sides of the
chain row, and after 4 sc, turn and continue
working on the other side. The piece will be oval. Continue
working in a circular fashion.
C2: 2inc, 12sc, 4inc, 12sc, 2inc (40)
C3 to 06: 40sc (40)
C7: (6sc, 1dec)* 5 (35)
C8 and 9: 35sc (35)
C10: (5sc, 1dec)* 5 (30)
C11 to 15: 30sc (30)
Place the filling, marking the center with your finger, where
we will place the hot glue stick to support the neck.
C16: (3dec, 9sc)* 2 (24)
C17 (3dec, 6sc)* 2 (18)Let’s put our arms together. Place the joint (9mm), or safety eye
(7mm) on the arm, between the flesh-colored line and the sleeve.
Attach to the side of the body between rows 16 and 17. Close the arms
with the magic ring inverted. Add more stuffing to the body
(mark with your finger in the center for the place for the glue stick) and
continue weaving the body
C18: 2dec, 3sc, 3dec, 3sc, 1dec (12)
C19: 12scx in BLO (12)
Change to the color chosen for the skin.
C20 to 23: 12sc (12)
C24: 12inc (24)
C25 to 27: 24sc (24)
Place the hot glue stick inside the body until the end
of this step (approx 7cm). Place some stuffing in the
neck, around the stick (do this gently so as not to
open the neck stitches, a felting needle can
help). Add the rest of the filling as
you weave.
C28: (2sc, 1dec)* 6 (18)
C29: (1sc, 1dec)* 6 (12)
C30: 6dec (6)
Close with magic ring.

second part of the head

Continue with the chosen skin color.
C1: 6sc in magic ring (6)
C2: 6inc (12)
C3: (1sc, 1inc)* 6 (18)
C4: (2sc, 1inc)* 6 (24)
C5: (3sc, 1inc)* 6 (30 )
C6 to 8: 30sc (30)
C9: (3sc, 1dec)* 6 (24)
Fit this part into the finished neck and continue weaving.
C10: (2sc, 1dec)* 6 (18)
C11:18sc (18)
C12: (1sc, 1dec)* 6 (12)
Fasten off but do not sew around the neck.
Continue with the skin color.
Fasten the thread from bottom to top as shown in the photo, so that the
head does not have stitches on the wrong side.
C13: 12inc (24)
Continue working in a circular fashion.
C14: (3sc, 1inc)* 6 (30)
Change to Off White
C15: 2sc, 1inc, (4sc, 1inc)* 5, 2sc (36)
C16: (5sc, 1inc)* 6 (42)
C17 : 3sc, 1inc, (6sc, 1inc)* 5, 3sc (48)
C18: (7sc + 1inc)* 6 (54)
C19 to 29: 54sc (54)

Place the nose (1cm) between rows 22 and 23 in the center of the face.
The eyes (9mm) between rows 25 and 26, with 8pts between them and
leaving the nose centered. In the Clown doll recipe there is
a suggestion of a crochet nose.
C30: (7sc, 1dec)* 6 (48)
C31: 3sc, 1dec, (6sc, 1dec)* 5, 3sc (42)
C32: (5sc, 1dec)* 6 (36)
C33: 2sc, 1dec, (4sc , 1dec)* 5, 2sc (30)
C34: (3sc, 1dec)* 6 (24)
C35: 1sc, 1dec, (2sc, 1dec)* 5, 1sc (18)
C36: (1sc, 1dec)* 6 ( 12)
C37: 6dim (6)
Close with inverted magic ring.

legs (make 2)

Amigurumi yarn in colors: (8176) and (7563).
Amigurumi Soft yarn in color (3116)
Add filling little by little. Do not fill the
last 4 rows.
In off white
Make 5 ch
C1: from the second ch do 1inc, 2sc, 4sc in the same
stitch, 2sc, 1inc (in the same place as the first AUM). (12)
The piece will be oval. Work in a circular manner.
C2: 2inc, 2sc, 4inc, 2sc, 2inc (20)
C3: 20sc in the third loop (BPSC) (20

C4: 6pb, 4dim, 6pb (16)
C5: 4pb, 4dim, 4pb (12)
C6: 4pb, 2dim, 4pb (10)
C7 a 11 : 10pb (10)
C12: 2pb (off White) + 8pb (rosa) (10)
C13: 2pb (rosa) + 8pb (off white) (10)

C14: 10sc off White (10)
C15: 3sc (off White) + 7sc (skin color)
C16: 10sc (skin color)
C17: (3sc, 1dec)* 2 (8) Place the filling.
C18: 4dec (4)
C19: 4inc (8)
C20: (3sc, 1inc)* 2 (10)
C21 to 34: 10sc (10). Leave thread for sewing.

details

Make triangular embroidery around one eye. I applied blush to my
cheeks and sewed a mini button on top.
I put a heart button on the butt and on the strap of the jumpsuit.

jumpsuit – candy

Soft color Amigurumi yarn (6042). Lilac.
Jumpsuit Belt
Make 6 ch and from the second ch go back doing:
C1: 5mtr (5)
C2 to 17: 2 ch + 5mtr in BLO turn (5).
Close both ends with a PBX row. Do not cut the
thread, and continue working on the side of the piece.

Jumpsuit body

C1: 1 ch (does not count as a stitch), 34sc around, with 2pts in
each hdc. Place a stitch marker. (34)
Work the next row in a circular manner, starting from the
first stitch of row 1.
C2: (1sc, 1inc)* 17 (51)
C3: (2sc, 1inc)* 17 (68)
C4 to 8: 68sc (68C9: 34sc (34) Weave only these 34 sts and stop. In the next
row, continue working circularly over the first point of that
row, forming the circle of one of the legs.
C10 to 14: 34sc (34)
C15: 17dec (17)
C16: 17dc (17)
Close with sl st and finish.To make the other, make a slip knot on the needle and attach it
next to the finished leg on the front of the jumpsuit.
Repeat rows 9 to 16.
Sew the middle of the legs to close the space if
necessary

shoulder straps

Make 15 ch and from the second ch go back making 14 sc.
Put the jumpsuit on the body and sew the straps in a vertical position.

shoe – make 2

Don’t stitch too tightly.
Amigurumi yarn color (1112).
Amigurumi Soft color yarn (3116).
In yellow.
Make 8ch and from the second chain go back doing:
C1: 1inc, 5sc, 4sc in the same stitch, 5sc, 1inc (in the same place
as the first AUM) (18)
C2: 2inc, 4sc, 1hdc, 4inc in pa, 1hdc, 4sc, 2inc (26)
C3: 3inc, 4sc, 1hdc, 2dc, 6inc in tr, 2dc, 1hdc, 4sc, 3inc (38)
C4: 38sc in the third loop (BPSC). (38)
C5: 10sc, 1hdc, 8dec in dc, 1hdc, 10sc (30)
C6: 1dec, 4sc, 1hdc, 8dec in dc, 1hdc, 4sc, 1dec (20)
C7: 4sc, (6dec in Dc), 4sc (14)
C8: 14scx (14). Do not overtighten the stitch.
FinishMake a mini pink pompom and glue or sew it to the tip.
The shoe is purposely much larger than the foot, so it is
necessary to add padding to the toe to maintain its
shape.
I used the same padding used in the body, and using
a felting needle, I managed to compact it only in the
front part of the shoe.

hair

Amigurumi Soft yarn in color (2218).
Make enough mini pompoms to cover your
head.
It is very important that the thread you use to attach the
pompom is long, as it will be used to attach the
pompoms to the head. Be careful not to cut it when cutting
the pompom threads when finishing.You can attach the pompoms to your head with a pin
to check if the quantity is good, or you can make them and
attach them to your head.
Tie 3 very strong knots and then place the remaining strand
inside the head, exiting in another place and cutting off the excess.